Thursday, October 27, 2016

How To Do Simple Air Conditioning Service And Repair

By Larry Morgan


One most known problem for air conditionings is improper operation. If the air conditioner is turned on, make sure to close all the windows and all the doors. Other known problems include its poor maintenance, installation, and poor services for its procedures. If installation is done improperly, duct leaks may happen and might also result to lesser airflow. If the refrigerant is not properly charged in the installation, its performance and its efficiency will be impaired.

Most manufacturers of air conditioners are producing high quality products. And if something fails, try to check the circuits and fuses. Before you reset the breakers, make sure to cool it down first for about five minutes. And if it stops unexpectedly, try to press the button to reset it because the switch for the high pressure limit may be slipped. But if there are problems that you cannot handle, here are some air conditioning service Las Vegas.

Other air conditioner problem is a refrigerant leak. This often happens when it is not charged at installation. If it happens to have a leak, a technician must fix it by doing a repair test and charging it with the right refrigerant amount. An air conditioner will be more efficient and will perform very well if the refrigerant matches the specifications of manufacturers.

Another is the failure of electric control. There are times that fans and compressors will deteriorate. It usually happens when the system is being turned off and on frequently. Deterioration of wires and terminals can be also a problem, so it is better to be checked also when a professional would do some services.

At the back control panel, a thermostat sensor can be seen. The purpose of the sensor is measuring the air temperature. If position deprecation happens, irregularity of air can be produced. The position of sensor must be close to the evaporative coil. Clogged drainage must also be checked to avoid stock ups.

In order to maintain air conditioners, the coils and filters must be kept clean. Dirty coils and filter may result that the system, the compressor, and the fan are going to function improperly. Coils and filters must always be maintained to avoid inefficient and ineffective functionalities.

Also, if the filters are dirty, it will block the passage of air. Filters have different variations, some can be reusable, and some may need replacement. These parts must be kept clean every 1 or 2 months. Constantly used air conditioners need constant attention.

The two coils that need to be cleaned regularly are evaporator and condenser coils. These coils collect dirt, thus, resulting to less airflow. Outdoor condenser coils often get dirty easily because of dust in the environment and of foliages.

Coil fins can be bent easily, and so if this happens, it may block the airflow. Seals in between the air conditioner and the window frame must be checked if this is still in contact with the metal case of the unit during cool season. The seal can be damaged because of moisture.




About the Author:



No comments: